Sparse matrix

Example of sparse matrix $\left({\begin{smallmatrix}11&22&0&0&0&0&0\\0&33&44&0&0&0&0\\0&0&55&66&77&0&0\\0&0&0&0&0&88&0\\0&0&0&0&0&0&99\\\end{smallmatrix}}\right)$
The above sparse matrix contains only 9 non-zero elements, with 26 zero elements. Its sparsity is 74%, and its density is 26%.

In numerical analysis and scientific computing, a sparse matrix or sparse array is a matrix in which most of the elements are zero.^[1] There is no strict definition regarding the proportion of zero-value elements for a matrix to qualify as sparse but a common criterion is that the number of non-zero elements is roughly equal to the number of rows or columns. By contrast, if most of the elements are non-zero, the matrix is considered dense.^[1] The number of zero-valued elements divided by the total number of elements (e.g., m × n for an m × n matrix) is sometimes referred to as the sparsity of the matrix.

Conceptually, sparsity corresponds to systems with few pairwise interactions. For example, consider a line of balls connected by springs from one to the next: this is a sparse system as only adjacent balls are coupled. By contrast, if the same line of balls were to have springs connecting each ball to all other balls, the system would correspond to a dense matrix. The concept of sparsity is useful in combinatorics and application areas such as network theory and numerical analysis, which typically have a low density of significant data or connections. Large sparse matrices often appear in scientific or engineering applications when solving partial differential equations.

When storing and manipulating sparse matrices on a computer, it is beneficial and often necessary to use specialized algorithms and data structures that take advantage of the sparse structure of the matrix. Specialized computers have been made for sparse matrices,^[2] as they are common in the machine learning field.^[3] Operations using standard dense-matrix structures and algorithms are slow and inefficient when applied to large sparse matrices as processing and memory are wasted on the zeros. Sparse data is by nature more easily compressed and thus requires significantly less storage. Some very large sparse matrices are infeasible to manipulate using standard dense-matrix algorithms.

Special cases

Banded

An important special type of sparse matrices is band matrix, defined as follows. The lower bandwidth of a matrix $A$ is the smallest number $p$ such that the entry $a i, j$ vanishes whenever $i > j + p$ . Similarly, the upper bandwidth is the smallest number $p$ such that $a i, j = 0$ whenever $i < j - p$ (Golub & Van Loan 1996, §1.2.1). For example, a tridiagonal matrix has lower bandwidth $1$ and upper bandwidth $1$ . As another example, the following sparse matrix has lower and upper bandwidth both equal to 3. Notice that zeros are represented with dots for clarity. ${\begin{bmatrix}X&X&X&\cdot &\cdot &\cdot &\cdot &\\X&X&\cdot &X&X&\cdot &\cdot &\\X&\cdot &X&\cdot &X&\cdot &\cdot &\\\cdot &X&\cdot &X&\cdot &X&\cdot &\\\cdot &X&X&\cdot &X&X&X&\\\cdot &\cdot &\cdot &X&X&X&\cdot &\\\cdot &\cdot &\cdot &\cdot &X&\cdot &X&\\\end{bmatrix}}$

Matrices with reasonably small upper and lower bandwidth are known as band matrices and often lend themselves to simpler algorithms than general sparse matrices; or one can sometimes apply dense matrix algorithms and gain efficiency simply by looping over a reduced number of indices.

By rearranging the rows and columns of a matrix $A$ it may be possible to obtain a matrix $A'$ with a lower bandwidth. A number of algorithms are designed for bandwidth minimization.

Diagonal

A very efficient structure for an extreme case of band matrices, the diagonal matrix, is to store just the entries in the main diagonal as a one-dimensional array, so a diagonal $n \times n$ matrix requires only $n$ entries.

Symmetric

A symmetric sparse matrix arises as the adjacency matrix of an undirected graph; it can be stored efficiently as an adjacency list.

Block diagonal

A block-diagonal matrix consists of sub-matrices along its diagonal blocks. A block-diagonal matrix $A$ has the form $\mathbf {A} ={\begin{bmatrix}\mathbf {A} _{1}&0&\cdots &0\\0&\mathbf {A} _{2}&\cdots &0\\\vdots &\vdots &\ddots &\vdots \\0&0&\cdots &\mathbf {A} _{n}\end{bmatrix}},$

where $A k$ is a square matrix for all $k = 1, ..., n$ .

Use

Reducing fill-in

The fill-in of a matrix are those entries that change from an initial zero to a non-zero value during the execution of an algorithm. To reduce the memory requirements and the number of arithmetic operations used during an algorithm, it is useful to minimize the fill-in by switching rows and columns in the matrix. The symbolic Cholesky decomposition can be used to calculate the worst possible fill-in before doing the actual Cholesky decomposition.

There are other methods than the Cholesky decomposition in use. Orthogonalization methods (such as QR factorization) are common, for example, when solving problems by least squares methods. While the theoretical fill-in is still the same, in practical terms the "false non-zeros" can be different for different methods. And symbolic versions of those algorithms can be used in the same manner as the symbolic Cholesky to compute worst case fill-in.

Solving sparse matrix equations

Both iterative and direct methods exist for sparse matrix solving.

Iterative methods, such as conjugate gradient method and GMRES utilize fast computations of matrix-vector products $Ax_{i}$ , where matrix $A$ is sparse. The use of preconditioners can significantly accelerate convergence of such iterative methods.

Storage

A matrix is typically stored as a two-dimensional array. Each entry in the array represents an element $a i, j$ of the matrix and is accessed by the two indices $i$ and $j$ . Conventionally, $i$ is the row index, numbered from top to bottom, and $j$ is the column index, numbered from left to right. For an $m \times n$ matrix, the amount of memory required to store the matrix in this format is proportional to $m \times n$ (disregarding the fact that the dimensions of the matrix also need to be stored).

In the case of a sparse matrix, substantial memory requirement reductions can be realized by storing only the non-zero entries. Depending on the number and distribution of the non-zero entries, different data structures can be used and yield huge savings in memory when compared to the basic approach. The trade-off is that accessing the individual elements becomes more complex and additional structures are needed to be able to recover the original matrix unambiguously.

Formats can be divided into two groups:

Those that support efficient modification, such as DOK (Dictionary of keys), LIL (List of lists), or COO (Coordinate list). These are typically used to construct the matrices.
Those that support efficient access and matrix operations, such as CSR (Compressed Sparse Row) or CSC (Compressed Sparse Column).

Dictionary of keys (DOK)

DOK consists of a dictionary that maps $(row, column)$ -pairs to the value of the elements. Elements that are missing from the dictionary are taken to be zero. The format is good for incrementally constructing a sparse matrix in random order, but poor for iterating over non-zero values in lexicographical order. One typically constructs a matrix in this format and then converts to another more efficient format for processing.^[4]

List of lists (LIL)

LIL stores one list per row, with each entry containing the column index and the value. Typically, these entries are kept sorted by column index for faster lookup. This is another format good for incremental matrix construction.^[5]

Coordinate list (COO)

COO stores a list of $(row, column, value)$ tuples. Ideally, the entries are sorted first by row index and then by column index, to improve random access times. This is another format that is good for incremental matrix construction.^[6]

Compressed sparse row (CSR, CRS or Yale format)

The compressed sparse row (CSR) or compressed row storage (CRS) or Yale format represents a matrix $M$ by three (one-dimensional) arrays, that respectively contain nonzero values, the extents of rows, and column indices. It is similar to COO, but compresses the row indices, hence the name. This format allows fast row access and matrix-vector multiplications ( $M x$ ). The CSR format has been in use since at least the mid-1960s, with the first complete description appearing in 1967.^[7]

The CSR format stores a sparse $m \times n$ matrix $M$ in row form using three (one-dimensional) arrays $(V, COL_INDEX, ROW_INDEX)$ . Let $NNZ$ denote the number of nonzero entries in $M$ . (Note that zero-based indices shall be used here.)

The arrays $V$ and $COL_INDEX$ are of length $NNZ$ , and contain the non-zero values and the column indices of those values respectively
$COL_INDEX$ contains the column in which the corresponding entry $V$ is located.
The array $ROW_INDEX$ is of length $m + 1$ and encodes the index in $V$ and $COL_INDEX$ where the given row starts. This is equivalent to $ROW_INDEX[j]$ encoding the total number of nonzeros above row $j$ . The last element is $NNZ$ , i.e., the fictitious index in $V$ immediately after the last valid index $NNZ - 1$ .^[8]

For example, the matrix ${\begin{pmatrix}5&0&0&0\\0&8&0&0\\0&0&3&0\\0&6&0&0\\\end{pmatrix}}$ is a $4 \times 4$ matrix with 4 nonzero elements, hence

V         = [ 5 8 3 6 ]
COL_INDEX = [ 0 1 2 1 ]
ROW_INDEX = [ 0 1 2 3 4 ]

assuming a zero-indexed language.

To extract a row, we first define:

row_start = ROW_INDEX[row]
row_end   = ROW_INDEX[row + 1]

Then we take slices from V and COL_INDEX starting at row_start and ending at row_end.

To extract the row 1 (the second row) of this matrix we set row_start=1 and row_end=2. Then we make the slices V[1:2] = [8] and COL_INDEX[1:2] = [1]. We now know that in row 1 we have one element at column 1 with value 8.

In this case the CSR representation contains 13 entries, compared to 16 in the original matrix. The CSR format saves on memory only when $NNZ < (m (n - 1) - 1) / 2$ .

Another example, the matrix ${\begin{pmatrix}10&20&0&0&0&0\\0&30&0&40&0&0\\0&0&50&60&70&0\\0&0&0&0&0&80\\\end{pmatrix}}$ is a $4 \times 6$ matrix (24 entries) with 8 nonzero elements, so

V         = [ 10 20 30 40 50 60 70 80 ]
COL_INDEX = [  0  1  1  3  2  3  4  5 ]   
ROW_INDEX = [  0  2  4  7  8 ]

The whole is stored as 21 entries: 8 in $V$ , 8 in $COL_INDEX$ , and 5 in $ROW_INDEX$ .

$ROW_INDEX$ splits the array $V$ into rows: (10, 20) (30, 40) (50, 60, 70) (80), indicating the index of $V$ (and $COL_INDEX$ ) where each row starts and ends;
$COL_INDEX$ aligns values in columns: (10, 20, ...) (0, 30, 0, 40, ...)(0, 0, 50, 60, 70, 0) (0, 0, 0, 0, 0, 80).

Note that in this format, the first value of $ROW_INDEX$ is always zero and the last is always $NNZ$ , so they are in some sense redundant (although in programming languages where the array length needs to be explicitly stored, $NNZ$ would not be redundant). Nonetheless, this does avoid the need to handle an exceptional case when computing the length of each row, as it guarantees the formula $ROW_INDEX[i + 1] - ROW_INDEX[i]$ works for any row $i$ . Moreover, the memory cost of this redundant storage is likely insignificant for a sufficiently large matrix.

The (old and new) Yale sparse matrix formats are instances of the CSR scheme. The old Yale format works exactly as described above, with three arrays; the new format combines $ROW_INDEX$ and $COL_INDEX$ into a single array and handles the diagonal of the matrix separately.^[9]

For logical adjacency matrices, the data array can be omitted, as the existence of an entry in the row array is sufficient to model a binary adjacency relation.

It is likely known as the Yale format because it was proposed in the 1977 Yale Sparse Matrix Package report from Department of Computer Science at Yale University.^[10]

Compressed sparse column (CSC or CCS)

CSC is similar to CSR except that values are read first by column, a row index is stored for each value, and column pointers are stored. For example, CSC is $(val, row_ind, col_ptr)$ , where $val$ is an array of the (top-to-bottom, then left-to-right) non-zero values of the matrix; $row_ind$ is the row indices corresponding to the values; and, $col_ptr$ is the list of $val$ indexes where each column starts. The name is based on the fact that column index information is compressed relative to the COO format. One typically uses another format (LIL, DOK, COO) for construction. This format is efficient for arithmetic operations, column slicing, and matrix-vector products. This is the traditional format for specifying a sparse matrix in MATLAB (via the sparse function).

Software

Many software libraries support sparse matrices, and provide solvers for sparse matrix equations. The following are open-source:

PETSc, a large C library, containing many different matrix solvers for a variety of matrix storage formats.
Trilinos, a large C++ library, with sub-libraries dedicated to the storage of dense and sparse matrices and solution of corresponding linear systems.
Eigen3 is a C++ library that contains several sparse matrix solvers. However, none of them are parallelized.
MUMPS (MUltifrontal Massively Parallel sparse direct Solver), written in Fortran90, is a frontal solver.
deal.II, a finite element library that also has a sub-library for sparse linear systems and their solution.
DUNE, another finite element library that also has a sub-library for sparse linear systems and their solution.
Armadillo provides a user-friendly C++ wrapper for BLAS and LAPACK.
SciPy provides support for several sparse matrix formats, linear algebra, and solvers.
ALGLIB is a C++ and C# library with sparse linear algebra support
ARPACK Fortran 77 library for sparse matrix diagonalization and manipulation, using the Arnoldi algorithm
SLEPc Library for solution of large scale linear systems and sparse matrices
scikit-learn, a Python library for machine learning, provides support for sparse matrices and solvers.

History

The term sparse matrix was possibly coined by Harry Markowitz who initiated some pioneering work but then left the field.^[11]

Notes

^ ^a ^b Yan, Di; Wu, Tao; Liu, Ying; Gao, Yang (2017). "An efficient sparse-dense matrix multiplication on a multicore system". 2017 IEEE 17th International Conference on Communication Technology (ICCT). IEEE. pp. 1880–3. doi:10.1109/icct.2017.8359956. ISBN 978-1-5090-3944-9. The computation kernel of DNN is large sparse-dense matrix multiplication. In the field of numerical analysis, a sparse matrix is a matrix populated primarily with zeros as elements of the table. By contrast, if the number of non-zero elements in a matrix is relatively large, then it is commonly considered a dense matrix. The fraction of zero elements (non-zero elements) in a matrix is called the sparsity (density). Operations using standard dense-matrix structures and algorithms are relatively slow and consume large amounts of memory when applied to large sparse matrices.
^ "Cerebras Systems Unveils the Industry's First Trillion Transistor Chip". www.businesswire.com. 2019-08-19. Retrieved 2019-12-02. The WSE contains 400,000 AI-optimized compute cores. Called SLAC™ for Sparse Linear Algebra Cores, the compute cores are flexible, programmable, and optimized for the sparse linear algebra that underpins all neural network computation
^ "Argonne National Laboratory Deploys Cerebras CS-1, the World's Fastest Artificial Intelligence Computer | Argonne National Laboratory". www.anl.gov (Press release). Retrieved 2019-12-02. The WSE is the largest chip ever made at 46,225 square millimeters in area, it is 56.7 times larger than the largest graphics processing unit. It contains 78 times more AI optimized compute cores, 3,000 times more high speed, on-chip memory, 10,000 times more memory bandwidth, and 33,000 times more communication bandwidth.
^ See scipy.sparse.dok_matrix
^ See scipy.sparse.lil_matrix
^ See scipy.sparse.coo_matrix
^ Buluç, Aydın; Fineman, Jeremy T.; Frigo, Matteo; Gilbert, John R.; Leiserson, Charles E. (2009). Parallel sparse matrix-vector and matrix-transpose-vector multiplication using compressed sparse blocks (PDF). ACM Symp. on Parallelism in Algorithms and Architectures. CiteSeerX 10.1.1.211.5256.
^ Saad 2003
^ Bank, Randolph E.; Douglas, Craig C. (1993), "Sparse Matrix Multiplication Package (SMMP)" (PDF), Advances in Computational Mathematics, 1: 127–137, doi:10.1007/BF02070824, S2CID 6412241
^ Eisenstat, S. C.; Gursky, M. C.; Schultz, M. H.; Sherman, A. H. (April 1977). "Yale Sparse Matrix Package" (PDF). Archived (PDF) from the original on April 6, 2019. Retrieved 6 April 2019.
^ Oral history interview with Harry M. Markowitz, pp. 9, 10.

References

Golub, Gene H.; Van Loan, Charles F. (1996). Matrix Computations (3rd ed.). Baltimore: Johns Hopkins. ISBN 978-0-8018-5414-9.
Stoer, Josef; Bulirsch, Roland (2002). Introduction to Numerical Analysis (3rd ed.). Springer. doi:10.1007/978-0-387-21738-3. ISBN 978-0-387-95452-3.
Tewarson, Reginald P. (1973). Sparse Matrices. Mathematics in science and engineering. Vol. 99. Academic Press. ISBN 0-12-685650-8. OCLC 316552948. (This book, by a professor at the State University of New York at Stony Book, was the first book exclusively dedicated to Sparse Matrices. Graduate courses using this as a textbook were offered at that University in the early 1980s).
Bank, Randolph E.; Douglas, Craig C. "Sparse Matrix Multiplication Package" (PDF).
Pissanetzky, Sergio (1984). Sparse Matrix Technology. Academic Press. ISBN 978-0-12-557580-5. OCLC 680489638.
Snay, Richard A. (1976). "Reducing the profile of sparse symmetric matrices". Bulletin Géodésique. 50 (4): 341–352. Bibcode:1976BGeod..50..341S. doi:10.1007/BF02521587. hdl:2027/uc1.31210024848523. S2CID 123079384. Also NOAA Technical Memorandum NOS NGS-4, National Geodetic Survey, Rockville, MD. Referencing Saad 2003.
Scott, Jennifer; Tuma, Miroslav (2023). Algorithms for Sparse Linear Systems. Birkhauser. doi:10.1007/978-3-031-25820-6. (Open Access)

v t e Data structures
Types	Collection Container
Abstract	Associative array Multimap Retrieval Data Structure List Stack Queue Double-ended queue Priority queue Double-ended priority queue Set Multiset Disjoint-set
Arrays	Bit array Circular buffer Dynamic array Hash table Hashed array tree Sparse matrix
Linked	Association list Linked list Skip list Unrolled linked list XOR linked list
Trees	B-tree Binary search tree AA tree AVL tree Red–black tree Self-balancing tree Splay tree Heap Binary heap Binomial heap Fibonacci heap R-tree R* tree R+ tree Hilbert R-tree Trie Hash tree
Graphs	Binary decision diagram Directed acyclic graph Directed acyclic word graph
List of data structures

v t e Matrix classes
Explicitly constrained entries	Alternant Anti-diagonal Anti-Hermitian Anti-symmetric Arrowhead Band Bidiagonal Bisymmetric Block-diagonal Block Block tridiagonal Boolean Cauchy Centrosymmetric Conference Complex Hadamard Copositive Diagonally dominant Diagonal Discrete Fourier Transform Elementary Equivalent Frobenius Generalized permutation Hadamard Hankel Hermitian Hessenberg Hollow Integer Logical Matrix unit Metzler Moore Nonnegative Pentadiagonal Permutation Persymmetric Polynomial Quaternionic Signature Skew-Hermitian Skew-symmetric Skyline Sparse Sylvester Symmetric Toeplitz Triangular Tridiagonal Vandermonde Walsh Z
Constant	Exchange Hilbert Identity Lehmer Of ones Pascal Pauli Redheffer Shift Zero
Conditions on eigenvalues or eigenvectors	Companion Convergent Defective Definite Diagonalizable Hurwitz Positive-definite Stieltjes
Satisfying conditions on products or inverses	Congruent Idempotent or Projection Invertible Involutory Nilpotent Normal Orthogonal Unimodular Unipotent Unitary Totally unimodular Weighing
With specific applications	Adjugate Alternating sign Augmented Bézout Carleman Cartan Circulant Cofactor Commutation Confusion Coxeter Distance Duplication and elimination Euclidean distance Fundamental (linear differential equation) Generator Gram Hessian Householder Jacobian Moment Payoff Pick Random Rotation Seifert Shear Similarity Symplectic Totally positive Transformation
Used in statistics	Centering Correlation Covariance Design Doubly stochastic Fisher information Hat Precision Stochastic Transition
Used in graph theory	Adjacency Biadjacency Degree Edmonds Incidence Laplacian Seidel adjacency Tutte
Used in science and engineering	Cabibbo–Kobayashi–Maskawa Density Fundamental (computer vision) Fuzzy associative Gamma Gell-Mann Hamiltonian Irregular Overlap S State transition Substitution Z (chemistry)
Related terms	Jordan normal form Linear independence Matrix exponential Matrix representation of conic sections Perfect matrix Pseudoinverse Row echelon form Wronskian
Mathematics portal List of matrices Category:Matrices

v t e Numerical linear algebra
Key concepts	Floating point Numerical stability
Problems	System of linear equations Matrix decompositions Matrix multiplication (algorithms) Matrix splitting Sparse problems
Hardware	CPU cache TLB Cache-oblivious algorithm SIMD Multiprocessing
Software	ATLAS MATLAB Basic Linear Algebra Subprograms (BLAS) LAPACK Specialized libraries General purpose software